The LD1000E linear actuator stands out due to its high performance and extremely durable construction. Thanks to its high push and pull forces of up to 10000 N and a maximum stroke length of 1000 mm, it is the ideal solution for demanding applications in the agricultural and off-highway sectors.
The LD1000E has a highly resistant housing made of die-cast aluminium with a super robust support tube made of anodised aluminium combined with a stainless-steel stroke pipe. The stroke length range starts from 100 up to 1000 mm. The linear drive features a fast adjustment speed of maximum 100 mm/s. The LD1000E is powered by maintenance-free 12 and 24 volt DC motors, to ensure a maximum of performance and reliability. The integrated control system enables precise adjustment of individual motion profiles and pinpoint positioning.
Due to having the maximum protection level of IP69K, the linear drive can withstand even extreme environmental conditions. It is not only protected against dust and penetrating water at high pressure but is also heat- and cold-resistant: The linear drive can even withstand temperatures of -20 to +65 degrees Celsius during operation. Moreover, it is unaffected by radiation from the sun. The linear drive is made-to-last thanks to this protective equipment and its durable mechanics. The LD1000E is optionally available with a digital positional feedback system, end stop signals as well as a bus system.
The LD1000E linear actuator is powerful and extremely robust. With a push stroke of 1000 mm and a force of 10,000 N, it is designed for use in agriculture and off-highway applications. The high protection class and the aluminium housing enable usage even in the most extreme conditions. This provides an affordable, maintenance-free alternative to existing drives.
Force up to 10,000 N | |
Stroke length up to 1000 mm | |
IP69K protection | |
Speed up to 100 mm/s | |
Robust construction | |
Easy to install into existing systems | |
Resistant to environmental influences | |
UV resistance | |
Operational safety in hot and cold areas: from -20 to +65 degrees | |
Built-in controller | |
Precision positioning | |
Long life span |
Suspensions individually selectable Special strokes adjustable ex works Overload clutch Manual emergency operation | |
General Data | |
---|---|
Force | max. 10.000N |
Speed adjustment | max. 100mm/s |
Stroke length | min. 15mm - max. 1000mm |
Built-in dimension (B) | up to stroke 399 = stroke + 200mm from stroke 400 = stroke + 250mm |
Duty cycle | 30% |
Position feedback | optional |
Motor voltage | 12VDC or 24VDC |
Intergrated limit switch | yes |
End position signal | optional |
Protection class | IP69K |
Ambient temperature range | -20°C bis +65°C |
Self-locking | up to nominal load |
Components | |
Rod end | Stainless steel, hole 12.1mm |
Housing end | Stainless steel, hole 12.1mm |
Lift tube material | Stainless steel |
Housing material | Die-cast aluminum, anodized aluminum profile |
Housing colour | similar to RAL 9005, black |
Connection | Connector M12 |
Cable length | 3m, 5m, 10m |
Options |
Control / Regulation | Change of polarity Hand Switch PLC |
---|---|
Position feedback | End position feedback potential bound End position feedback potential-free |
Monitoring | Current limitation |